Self-install
- Pre-programmed sensors posted to you
- Your own electrician can fit the clamps in as little as an afternoon
- The other sensors just clip on or plug in
Ignis by SavaWatt · Energy and temperature monitoring
Ignis is a low-cost monitoring system for small sites. It measures your energy, watches your fridges and freezers, and emails you when something’s left on. Most customers find savings in the first week.
Made for pubs and restaurants, shops, offices, schools, cold stores, warehouses and community buildings.
Every kWh, every fridge, every night. Ignis shows you where the money goes, so you can stop the waste and prove the savings.
See where it goes: by appliance, by hour, by day. Live power and cost for everything you monitor.
The portal highlights out-of-hours use and your biggest consumers, so you know where to start.
Ovens, lights, heaters, compressors. Ignis emails you when something’s on that shouldn’t be.
Temperature and energy together, so you catch a failing unit before the stock does.
Tell Ignis when your site is closed and what should be off. If the oven is still drawing power at 23:00, or the cold room creeps above 5 °C, you get an email straight away, with the reading, the time and the site.
Two decisions: what you want to monitor, and whether you fit it yourself or we do.
Your kit is made up from these. Pick what matters to your site, mix and match, and add more later.
Meters and clamps on your main supply and the circuits that matter: kitchens, plant, lighting, heating.
Fridges, freezers, rooms and cold stores, with an alert when anything drifts out of range.
Humidity and light level, for offices, classrooms, meeting rooms and cellars; CO₂ on request.
Flooding and leaks, doors or windows left open, motion and presence, and smoke alarms.
Reaches sensors in far corners: a Bluetooth hub and Wi-Fi extender, not a sensor.
A pulse reader on your gas meter, for kitchens and boilers: often the bigger bill.
No Wi-Fi at the meter? We have options. Long-range LoRa radio links reach meter cupboards, cellars and outbuildings where Wi-Fi doesn’t, and bring the readings back to one place.
Bring your own hardware
Many sites already have energy meters, sub-meters or temperature loggers from an earlier system. Where they can be read, Ignis can use them, so moving to Ignis costs less than starting again.
Ignis works with most existing energy meters, sub-meters and temperature loggers with a network connection or a standard output.
or call 01455 818208
We reuse what works and only add what’s missing, so the kit quote is smaller.
Where the old system can export its readings, we can usually import them, so your baselines and comparisons start from day one instead of from an empty chart.
We check what’s installed, what it can report and how often, and quote from that. Price on application.
Real views from the Ignis portal, using our demo sites.
Every site and sensor, updated every minute.
Overlay energy, temperature and humidity on one chart.
Only when it matters: nights, weekends, or around the clock.
Energy, cost, carbon and temperatures, emailed every month.
See what you spend while you’re closed.
Time in band for every fridge, freezer and room.
Your readings, any time, for your own spreadsheets.
Every account uses an authenticator app or a passkey.
Features marked Insight come with the Insight plan. See pricing.
A quick, honest estimate. It runs in your browser: nothing you type is sent anywhere.
Sites like yours typically cut 8–15 % through what Ignis shows you:
£1,920–£3,600 a year
on a £24,000 bill.
Enter your monthly bill to see an estimate.
Monitor costs £260 a year paid annually, so it pays for itself in about 8 weeks. Rolling monthly is £26 a month, or Insight at £442 a year.
At this bill size, energy savings alone may not cover Monitor’s £260 a year, though one fridge failure caught in time can. Talk to us about what makes sense for your site.
Kits from £250, quoted for your site. Prices ex VAT.
Want more than behaviour change? SavaWatt’s engineered controls typically add another 10–35 %: £2,400–£8,400 a year on a bill like yours.
Talk to SavaWattHow we work it out. Behaviour change typically saves 8–15 % of an electricity bill, and up to 20 %. Offices, schools and community buildings tend towards the top of that range; cold stores and warehouses towards the bottom. Sites that are closed for longer waste more while nobody’s there, so the range moves up as opening hours go down, and down for sites open around the clock. Annual bill = monthly spend × 12; savings rounded to the nearest £10; payback against Monitor paid annually (£5 a week, £260 a year, a site with up to 10 devices); rolling monthly is £26 a month, or Insight at £442 a year. Estimates are illustrative: what you actually save depends on your site and what you do with the information.
Two plans, priced per site. The first 10 devices at each site are included.
See what your building is doing, and hear about it when something’s wrong.
Paid yearly
£5 a week
£260 a year ex VAT, paid up front
Rolling monthly
£6 a week
£26 a month ex VAT, cancel any time
Everything in Monitor, plus Ignis finds the problems and tells you what they cost.
Paid yearly
£8.50 a week
£442 a year ex VAT, paid up front. No monthly option.
Everything in Monitor, plus:
A device is anything we monitor at the site: a clamp on a circuit or appliance, or a temperature, door, motion, leak or smoke sensor. Each one over 10 adds:
| Each device | Monitor | Insight |
|---|---|---|
| 11 to 20 | £0.50 a week | £0.55 a week |
| 21 and up | £0.40 a week | £0.45 a week |
At the yearly price, ex VAT.
Kits from £250. Self-install or fully installed; hardware and installation quoted separately.
Groups and estates: each site has its own plan, and your consultant can have a free login to look after them with you.
Talk to usPrices exclude VAT and are per site. Monitor is £260 a year paid up front (£5 a week), or £26 a month rolling monthly (£312 a year, £6 a week) with no minimum term, cancel any time. Insight is £442 a year paid up front (£8.50 a week). Both include the site’s first 10 devices; each device from 11 to 20 is £26 a year on Monitor and £28.60 on Insight, and each from 21 up £20.80 and £23.40. Monitor charts and exports show a reading every 15 minutes; Insight also shows a reading every minute, on charts of up to two days and exports of up to 7 days (31 days for a single device). Hardware and installation are quoted separately and remain your property; kits from £250. Your data is kept while you’re a customer. Savings estimates are illustrative; actual savings depend on your site and how you act on the information.
For consultants
Energy consultants and facilities managers who look after several clients get a free consultant login. It shows all your customers’ sites in one portal, so you can keep an eye on every client from one place.
The quotes below are examples of what customers typically tell us. Real customer stories are on their way.
“We found the walk-in freezer running all night with a tired door seal. A £40 fix, and the next bill was lower.”
“The heatmap showed the heating coming on at 4 am at weekends. One timer change.”
“I get an email if the chillers go above 5 °C. It paid for itself the one night it went off.”
“Out-of-hours use was over a third of our bill. Now we can see it, and it’s coming down every term.”
“Ten minutes to put the fridge sensors in, and the temperature history backs up our food safety records.”
“Volunteers switch things off now because they can see what it costs.”
Ignis finds it. SavaWatt fixes it.
Behaviour change typically saves 8–15 %. SavaWatt’s engineered energy-saving controls typically take another 10–35 % off, and because they’re engineered into your equipment, the savings don’t depend on anyone remembering to switch things off. Ignis measures the before and after, so you can see them for yourself.
Anything else? Talk to us or call 01455 818208.
A kit made up for your site from four kinds of sensor: energy meters and clamps for your main supply and the circuits that matter, temperature sensors for fridges, freezers, rooms and cold stores, air-quality sensors (humidity and light level; CO₂ on request), and alert sensors for leaks, doors or windows left open, motion and presence, and smoke alarms; a booster reaches sensors in far corners. It arrives pre-programmed. Kits start from £250, quoted for your site.
Often, yes: most existing energy meters, sub-meters and temperature loggers with a network connection or a standard output can be read by Ignis, so we only add what’s missing, and where the old system can export its readings we can usually bring your history across too. We survey what’s installed and what it can report, then quote from that.
Coming soon. A pulse reader on your gas meter will bring kitchens and boilers into the same charts, problems and reports as your electricity, often the bigger bill. Ask us to be told when it is ready.
Most sensors use your site’s Wi-Fi. No Wi-Fi at the meter, or thick walls in the way? We have options: long-range LoRa radio links reach meter cupboards, cellars and outbuildings.
Usually an afternoon. Plug-in and clip-on sensors take minutes. Energy clamps go around existing cables, with no new wiring and no downtime.
Either. Self-install: we post you pre-programmed sensors, your own electrician can fit the clamps in as little as an afternoon, and the other sensors just clip on or plug in. Fully installed: our engineer fits and commissions everything, and checks every sensor is live in the portal before leaving, so there’s nothing for you to do but open the app.
The Ignis Monitor plan for one site with up to 10 devices: the live dashboard, map and charts with a reading every 15 minutes, email alerts, 13 months’ history, 2 users and CSV export. £5 a week is the yearly price: £260 a year ex VAT, paid up front. Rolling monthly is £26 a month ex VAT (£312 a year, £6 a week). Hardware and installation are quoted separately.
Monitor shows you what your site is doing and emails you when something’s wrong. Insight, at £8.50 a week (£442 a year ex VAT, paid yearly; there’s no monthly option), adds 24 months’ history, cost and carbon, what you use while you’re closed, a list of problems found for you each morning with a 07:30 email and one-tap replies, nightly re-checks and verified savings, a monthly PDF report, league tables, trends and kWh per cover.
Anything we monitor at the site: a clamp on a circuit or appliance, or a temperature, door, motion, leak or smoke sensor. Both plans include a site’s first 10 devices. Each one from 11 to 20 is £0.50 a week on Monitor and £0.55 on Insight, and each from 21 up £0.40 and £0.45 (at the yearly price, ex VAT).
On rolling monthly Monitor, yes: no minimum term, cancel any time. The yearly plans are paid up front for the year. Either way, the hardware is yours to keep.
Every account uses two-step sign-in (an authenticator app or a passkey), the portal only runs over a secure connection, and one customer never sees another’s data. SavaWatt’s privacy policy explains how your data is handled. Read the privacy policy.
The people you invite, and SavaWatt’s support team when they help you. You decide who has access, and users can be limited to particular sites. Consultants only see your sites when SavaWatt gives them access at your request, and you can see who has access on your Users page.
Ignis is built for it: every site on one map, with a table showing how they compare. Each site has its own plan, priced on its own devices; Insight adds league tables that rank your sites against each other. Consultants looking after several clients can have a free consultant login.